Protectapeel Application
Protectapeel is applied using an airless spray gun, eliminating the need for measuring or cutting to size (if you used protective film or board). It is quickly applied taking just 49 seconds per m².
Protectapeel is applied using an airless spray gun. For optimal results, we recommend using the Graco 390. If needed, spray guns are also available for rent directly from us.
Protectapeel is designed for straightforward application, making it easy for you and your team to apply it independently. To help you achieve the best results, we also offer complimentary training with our application technician.
The recommended application thickness for each Protectapeel product is detailed in the Technical Data Sheet. Applying the minimum thickness is essential for effective protection and easy removal.
Protectapeel Protection
Protectapeel can be applied to a variety of non-porous surfaces, including glass, windows, aluminium, stainless steel, and more, offering protection against scratches, paint, dust, and debris. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Yes, applying Protectapeel Top Coat on top of Protectapeel Original creates a waterproof barrier that effectively protects surfaces from moisture and contaminants.
Yes, Protectapeel is specifically designed to endure harsh weather conditions, including UV rays, rain, and wind, making it ideal for outdoor use. Additionally, Protectapeel Anti-Rust has undergone 1,440 hours of salt spray testing and achieved a C5 High durability rating in compliance with EN ISO 12944-6 and EN ISO 9227 standards.
Protectapeel is designed to protect surfaces from costly damage during manufacturing, construction, storage, and transportation. It helps minimise delays caused by repairs or replacements and reduces cleaning costs.
Protectapeel is suitable for use up to 12 months.
Protectapeel Removal
Simply peel it off from one edge. It comes off in one piece, leaving no residue or damage to the surface.
No, Protectapeel peels off cleanly without leaving any adhesive or residue on the surface.
Yes, Protectapeel is UV-resistant and can be removed easily even after prolonged exposure to sunlight.
Yes, Protectapeel is eco-friendly and recyclable after removal, making it a sustainable choice for surface protection. For more information about our free Recycle Point service click here.
Construction Protection
Protectapeel provides a peelable coating that protects glass from scratches, dirt, and damage during construction. It is easily applied using an airless spray gun, reducing labour requirements on-site. Once the project is complete, the coating can be effortlessly peeled away, leaving the glass clean and undamaged.
Yes, Protectapeel can be applied to non-porous door and window frames to protect from damage caused by scratching, plaster, or weather exposure. Before full application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Once the windows are installed, apply Protectapeel immediately to protect them during finishing works.
Protectapeel offers a simple solution for protecting countertops during construction. It can be applied directly without the need for measuring, cutting, or taping. Simply spray it on, allow it to dry, and it will shield countertops from damage such as scratches, mortar, and paint overspray. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Yes, Protectapeel can be applied to a range of non-porous surfaces, including flooring, sanitary basins, countertops, windows, frames, and doors. Before project handover, it can be easily removed by hand peeling, revealing clean, undamaged surfaces without delays or additional costs. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Protectapeel offers significant advantages over traditional protective films and boards by drastically reducing labour during application and removal. Unlike films that can lose adhesion or boards that shift out of place, Protectapeel adheres securely to surfaces, ensuring consistent protection for up to 12 months.
Additionally, Protectapeel’s effective barrier minimises cleaning costs by shielding surfaces from dirt, dust, and debris. These combined benefits make it a far more cost-effective and reliable solution for construction projects.
Check out our cost comparison to see how Protectapeel outperforms protective film and board in cost-effectiveness.
Purchasing Protectapeel
The cost of Protectapeel depends on the size and type of product you purchase. While protective film and boards are often seen as cheaper surface protection options, we conducted a cost comparison to evaluate this assumption. Take a look at our cost comparison. For detailed results and more information, please contact us.
Protectapeel is primarily supplied in 15-kilo containers. For larger projects, IBCs are also available.
